Spectrum and Gouging ® 875/875 Auto-Line

Industrial Applications
Construction
Maintenance/repair
Fabrication
Process
Air plasma cutting and gouging

Rated Input
875: 208 or 230 V, 1-phase
875 Auto-Line: 208 – 575 V, 1- or 3-phase
Rated Output at 104°F (40°C)
875/875 Auto-Line: 1-phase: 60 A at 140 VDC,
208 V: 40% duty cycle, 230 V: 40% duty cycle
875 Auto-Line: 3-phase: 60 A at 140 VDC,
208 V: 40% duty cycle
230–380 V: 50% duty cycle
380–575 V: 60% duty cycle
See page 2 for 100% duty cycle ratings

Cutting Capability
Rated: 7/8 in. (22.2 mm)
Sever: 1-1/4 in. (32 mm)
System Net Weight
875: with 20 ft. torch: 49 lb. (22.2 kg)
with 50 ft. torch: 58 lb. (26.3 kg)
875 Auto-Line with hand-held torch:
with 20 ft. torch: 54 lb. (24.5 kg)
with 50 ft. torch: 63 lb. (28.6 kg)
875 Auto-Line with machine torch:
with 25 ft. torch: 56 lb. (25.4 kg)
with 50 ft. torch: 63 lb. (28.6 kg)
Required Input
Pressure/Flow
6.75 cfm
(191 L/min.) at
90 psi minimum
(621 kPa),
120 psi maximum
(828 kPa)

875 Auto-Line™ unit automatically connects to any primary input voltage from 208 – 575 volts
single- or three-phase, 50 or 60 Hz.
LVC™ line voltage compensation provides peak performance power under variable conditions
(power fluctuations up to ±15 percent) for steady cuts and cleaner ending cuts.
Consumables storage compartment provides convenient access to consumables and parts.
Heavy-duty work clamp with flexible cable and quick connect.                                                                        Wind Tunnel Technology™ prevents abrasive dust and particles from damaging
internal components.
Fan-On-Demand™ cooling system operates only when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit.
Auto postflow calculates the length of postflow time based on the amount of cutting time to optimize consumable life and eliminate excessive air usage.